(022) 61393000 (100 Lines)

ELECTRO CHEMICAL INSTRUMENTS Manufacturer Supplier and Exporters

Contech, Multiparameter Meter is the perfect combination of advanced Electro chemical sensor technology with state of the art electronics and software design. This instrument can measure several parameters, like pH, mV, Conductivity TDS, Salinity, Resistivity, Dissolved oxygen & temperature using different electrodes. Large scale integration of circuit using surface mounted components and dedicated backlite LCD with display of various measuring parameter units for different parameters being measured has enabled to use this compact instrument for the measurement of multiple parameters without any ambiguity. This instrument is very useful where all parameters need to be measured like in the field of environmental protection, water quality checking, disease control, biological agriculture, aqua culture & scientific research.

Multiparameter Meter pH, mv, ms ,µs, mg/L, ppt, %, ppm,oC

FOR WATER QUALITY ANALYSIS - CMPM-01

Features
* pH , mV, Conductivity, Resistivity, TDS, Salinity, DO, Temperature modes.
* Automatic or Manual temperature Compensation.
* 3 point pH calibration.
* Buffers selectable from 1.68pH, 4.00pH, 4.01pH, 6.86pH, 7.00pH, 9.18pH, 9.20pH. 10.01pH and 12.45pH.
* Automatic buffer recognition.
* 1 point conductivity calibration for the entire range.
* Dissolved oxygen electrode with the salinity measurement feature to achieve automatic salinity & temperature compensation.
* Automatic air pressure compensation for DO with the help of air pressure sensor.
* Polarographic type DO electrode offers short polarization time, quick response and precise measurements.
* Bi directional RS232 interface. Baud rate selectable from 1200,2400,4800 and 9600.
* Single and continuous print out of measuring parameters.
* Multiple Printout types. Combinations selectable from Sr. No., pH, mV, conductivity, TDS, Salinity, DO, Date, time and temperature..
* Real Time Clock.
* Calibration report as per GLP requirements.
* Electrode Slope and mV offset display.
* LCD display with Backlight.
* Memory storage of 100 measurements.
* Data logging facility up to 500 results. Data logging interval selectable from 5S, 10S, 20S, 30S, 1M, 2M and 5M.
* Temperature calibration with respect to solution of known temperature.


Magnetic Stirrer : CMS - 01 Optional
For Proper Performance Of DO Meter, Magnetic Stirrer Is Must

  pH    mV Conductivity Resistivity TDS Salinity DO Temp
Range 0 - 14 pH  +1999.9mV Conductivity : 
0~200m5/cm spread
into 5 ranges
0.00~20.00µS/cm, 
20.0~200.0 µS/cm, 
200~2000 µS/cm
2.00~20.00mS/cm, 
20.0~200.0 mS/cm,
0~100MΩ.cm 0~100ppt(g/L) 0~100ppt
0~200.0%

 

0~40.00mg/L(ppm), -10.0 ~ 110.0°C
Accuracy +0.02pH +1mV  +1% FS       +1% FS +0.4°C
ATC        0~100°C 0~100°C 0~50°C 0~50°C 0~50°C 0~50°C 0~45°C +0.4°C
Electrode       EpHP01 EpHP01 ECNG01 ECNG01 ECNG01 ECNG01 EDO01 ETS01

* Power : 9V/ 500 mA External adaptor or battery backup unit (Optional)
* Operating Temperature : 15~45°C
* Meter Dimensions (mm) : 165 (L) x 190 (D) x 60 (H)
* Meter Weight : 700 g

Optional Accessories :
Magnetic Stirrer MS-01,
Battery backup unit BBEC-01
Calibration Standards

LAB pH METER, PRECISION
pH, mv,°C

CpH-102 & CpH-103

Contech CpH -102, an advanced Bench top pH Meter is the perfect combination of the state of the art electronic design coupled with advanced software & reliable electro chemical sensor higher uses a combination plastic pH electrode with inbuilt temperature sensor for the simultaneous measurements of pH & temperature & automatic temperature correction. CpH-103, a higher end bench pH Meter incorporates a glass electrode & seperate temperature sensor for high accuracy pH measurement & automatic temperature compansation.

These pH Meters cover innumerable applications in Research, Education, Chemical, Pharmaceutical, Food processing, Cosmetic, Biological & Agricultural fields.

Features

* pH, mV and temperature measurement.
* Automatic or Manual temperature Compensation.
* 3 point pH calibration, Automatic buffer recognition.
* Buffers selectable from 1.68pH, 4.00pH, 4.01pH, 6.86pH, 7.00pH, 9.18pH, 9.20pH. 10.01pH and 12.45pH.
* Bi directional RS232 interface. Baud rate selectable from 1200,2400,4800 and 9600.
* Single and continuous print out of measuring parameters.
* Multiple Printout types. Combinations selectable from Sr. No., pH, mV, Date, time and temperature. * Real Time Clock. Calibration report as per GLP requirements.
* Electrode Slope and mV offset display.
* Memory storage of 100 pH measurements.
* Data logging facility up to 500 results. Data logging interval selectable from 5S, 10S, 20S, 30S, 1M, 2M and 5M.
* Temperature calibration with respect to solution of known temperature.
* Micro-Controller Based.

Specifications:

  Model     CpH-102   CpH-103
   pH Range    0-14pH   -2.0000~19.999pH
   pH Resolution    0.01pH   0.001pH
   pH Accuracy   +0.002pH   +0.002pH
   Temperature compensation    Automatic or Manual   Automatic or Manual
   Temperature range    0~100°C    0~100°C
   mV Range    +1999mV   +1999.9mV 
   mV Resolution    1mV    0.1mV
   mV Accuracy     +1mV   +0.5mV
   Electrode   pH combination electrode with built in temperature sensor 
- Plastic-EpHP02
  pH combination electrode 
- Glass -EpHG03
  Temperature Electrode   Built in   Temperature sensor electrode

* Power : 9V/ 500 mA External adaptor
* Operating Temperature : 15~45°C
* Meter Dimensions (mm) : 165 (L) x 190 (D) x 60 (H)
* Meter Weight : 700 g
* Optional Accessories : Magnetic Stirrer MS-01, Battery backup unit BBEC-01 Calibration Standards

Conductivity Meters
ms,µs,mg/L,ppt,°C

CC-01

Contech Laboratory Conductivity Meter can measure Conductivity, Resistivity, Total Dissolved Solids(TDS), Salinity & Temperature of any solution. This instrument is suitable in the field of water quality monitoring, aqua culture, biological agriculture, scientific & educational research, food safety, petrochemical and environmental protection. It uses ECNG01 glass electrode with a platinum plate sensitive element coated with platinum black to avoid errors due to polarization especially in solutions of high conductivity.

Features

* Conductivity, resistivity, total dissolved solids(TDS), salinity & temperature measurement.
* Automatic or manual temperature compensation.
* 1 point calibration for the entire range.
* Bi directional RS232 interface. Baud rate selectable from 1200, 2400, 4800 and 9600.
* Single and continuous print out of readings.
* Multiple Printout types. Combinations selectable from different measuring units.
* Real Time Clock. Calibration report as per GLP requirements.
* Memory storage of 100 measurements.
* Data logging facility up to 500 results. Data logging interval selectable from 5S, 10S, 20S, 30S, 1M, 2M and 5M.
* Temperature calibration with respect to solution of known temperature.

Specifications:

 Measurement Range   Conductivity : 0~200mS/cm spread into 
5 ranges 0.00~20.00µS/cm, 20.0~200.0 µS/cm, 
200~2000 µS/cm, 2.00~20.00mS/cm, 
20.0~200.0 mS/cm, 
Resistivity : 0~100MΩcm
TDS : 0~100ppt (g/L) 
Salinity : 0~100ppt
Temperature : -10.0 ~ 110.0°C
  Precision   Conductivity : +1% FS
Temperature : +0.4°C
  ATC    0~50°C
  Display   Backlite LCD
  Power   9V/ 500 mA External adaptor or battery backup unit (Optional)
  Operating Temperature   15~45°C
  Meter Dimensions (mm)   165 (L) x 190 (D) x 60 (H)
  Meter Weight   700 g
  Electrode   Conductivity electrode - ECNG01 
Temperature sensor electrode- ETS01

* Power : 9V/ 500 mA External adaptor
* Operating Temperature : 15~45°C
* Meter Dimensions (mm) : 165 (L) x 190 (D) x 60 (H)
* Meter Weight : 700 g
* Optional Accessories : Magnetic Stirrer MS-01, Battery backup unit BBEC-01 Calibration Standards.

DISSOLVED OXYGEN METER
mg/L,ppm,%,°C

CDO-01

Contech Dissolved Oxygen Meter incorporates membrane electrode method to measure dissolved oxygen concentration, and saturation of water solution. Polarographic type dissolved oxygen electrode offers quick response, accurate measurement, short polarization time along with features for automatic salinity and temperature compensation & air pressure correction with the help of built in air pressure sensor. DO meters are useful for aquaculture, monitoring of water resource, beverage production, sewage disposal, biological agriculture, environmental protection and scientific research.

Features

* Dissolved oxygen and temperature measurement.
* Polarographic type DO electrode offers short polarization time, quick response and precise measurements.
* Easy to use electrode calibration sets and diaphragm cap.
* Dissolved oxygen electrode with the salinity measurement feature to achieve automatic salinity & temperature compensation.
* Automatic air pressure correction with the help of air pressure sensor.
* Bi directional RS232 interface. Baud rate selectable from 1200,2400,4800 and 9600.
* Single and continuous print out of readings.
* Multiple Printout types. Combinations selectable from Different Measuring Parameters.
* Real Time Clock. Calibration report as per GLP requirements.
* Memory storage of 100 test results.
* Data logging facility up to 500 results. Data logging interval selectable from 5S, 10S, 20S, 30S, 1M, 2M and 5M.

Specifications:

Measurement Range   DO : 0~40.00mg/L (ppm), 0~200.0% Temperature : 0 ~ 45°C
  Precision   DO : +1 FS Temperature : +0.4°C
  Temperature correction   Automatic 0~45°C
  Salinity correction   Automatic 0~45ppt
  Air pressure correction   Automatic 80 ~ 105kPa
  Display   Backlight LCD
  Power   9V/ 500 mA External adaptor or battery backup unit (Optional)
  Operating Temperature   15~45°C
  Meter Dimensions (mm)   165 (L) x 190 (D) x 60 (H)
  Meter Weight   700 g
  Electrode   DO electrode-EDO01

* Power : 9V/ 500 mA External adaptor
* Operating Temperature : 15~45°C
* Meter Dimensions (mm) : 165 (L) x 190 (D) x 60 (H)
* Meter Weight : 700 g
* Optional Accessories : Magnetic Stirrer MS-01, Battery backup unit BBEC-01 Calibration Standards

ORP METER
pH,Rel.mv,°C

COR-01

Contech ORP Meter combined with EORP-01 electrode is used for the measurement of oxidation reduction potential (ORP) in liquids. These ORP meters are mainly used in waste water testing. For pH measurements, pH electrode (Optional) should be used. However the instrument has to be recalibrated with pH electrode using pH standard solutions.

Features

* Rel.mV and temperature measurement.
* Automatic or manual temperature compensation.
* Automatic buffer recognition.
* Bi directional RS232 interface. Baud rate selectable from 1200, 2400,4800 and 9600.
* Single and continuous print out of Rel.mV.
* Multiple Printout types. Combinations selectable from Sr. No., Rel.mV, Date, time and temperature.
* Real Time Clock. Calibration report as per GLP requirements.
* Electrode Slope display.
* Memory storage of 100 measurements.
* Data logging facility up to 500 results. Data logging interval selectable from 5S, 10S, 20S, 30S, 1M, 2M and 5M.
* Temperature calibration with respect to solution of known temperature.

 

Specifications :

  ORP Range   +2000mV
  Temperature range   0~100°C
  ORP Resolution   1mV
  ORP Accuracy   +1mV
  Temperature compensation   Automatic or Manual
  Input Resistance   >1x1012Ω
  Display   Backlight LCD, Character height
  Power   9V/ 500 mA External adaptor or  battery backup unit (Optional)
  Operating Temperature   15~45°C
  Meter Dimensions (mm)   165 (L) x 190 (D) x 60 (H)
  Meter Weight   700 g
  ORP Electrode   ORP Combination Electrode EORP-01 Temperature Electrode ETS01


*For pH measurements, pH electrode (Optional) should be used.
However the instrument has to be recalibrated with
pH electrode using pH standard solutions.


* Power : 9V/ 500 mA External adaptor
* Operating Temperature : 15~45°C
* Meter Dimensions (mm) : 165 (L) x 190 (D) x 60 (H)
* Meter Weight : 700 g
* Optional Accessories : Magnetic Stirrer MS-01, Battery backup unit BBEC-01 Calibration Standards.

pH/Conductivity Meter
pH,mv,ms, µs,mg/L,ppt,°C

CpHC

Features
* pH , mV, Conductivity, Resistivity, TDS, Salinity, Temperature modes.
* Automatic or Manual temperature Compensation.
* 3 point pH calibration.
* Buffers selectable from 1.68pH, 4.00pH, 4.01pH, 6.86pH, 7.00pH, 9.18pH, 9.20pH. 10.01pH and 12.45pH.
* Automatic buffer recognition.
* 1 point conductivity calibration for the entire range.
* Bi directional RS232 interface. Baud rate selectable from 1200,2400,4800 and 9600.
* Single and continuous print out of measuring parameters.
* Multiple Printout types. Combinations selectable from Sr. No., pH, mV, conductivity, TDS, Salinity, Date, time and temperature.
* Real Time Clock.
* Calibration report as per GLP requirements.
* Electrode Slope and mV offset display.
* LCD display with Backlight.
* Memory storage of 100 measurements.
* Data logging facility up to 500 results. Data logging interval selectable from 5S, 10S, 20S, 30S, 1M, 2M and 5M.
* Temperature calibration with respect to solution of known temperature.

 pH Range    0-14pH
   mV Range    ±1999.9mV
   Conductivity Range    0~200mS/cm spread into 5 ranges
0.00~20.00μS/cm, 20.0~200.0 μS/cm,
200~2000 μS/cm
2.00~20.00mS/cm, 20.0~200.0 mS/cm,
   Resistivity Range    0~100MΩcm
   TDS Range    0~100ppt(g/L)
   Salinity Range    0~100ppt
   Temperature Range   -10.0~110.0°C
   pH Accuracy   +0.02pH
   mV Accuracy   +1mV
   Conductivity Accuracy   +1% FS
   Temperature Accuracy   +1% FS
   ATC pH   0~100°C
   ATC Conductivity   0~50°C
   pH Electrode   pH combination electrode-EpHG03
  Temperature Electrode   Temperature sensor electrode-ETS01
  Conductivity Electrode   ECNG01

* Power : 9V/ 500 mA External adaptor
* Operating Temperature : 15~45°C
* Meter Dimensions (mm) : 165 (L) x 190 (D) x 60 (H)
* Meter Weight : 700 g
* Optional Accessories : Magnetic Stirrer MS-01, Battery backup unit BBEC-01 Calibration Standards

pH / Dissolved Oxygen Meter
pH,mv,mg/L,ppm,%,°C

CpHDO

Features
* pH , mV, DO, Temperature modes.
* Dissolved oxygen electrode with the salinity measurement feature to achieve automatic salinity & temperature compensation.
* Automatic air pressure correction with the help of air pressure sensor.
* Polarographic type DO electrode offers short polarization time, quick response and precise measurements.
* Automatic or Manual temperature Compensation.
* 3 point pH calibration.
* Buffers selectable from 1.68pH, 4.00pH, 4.01pH, 6.86pH, 7.00pH, 9.18pH, 9.20pH. 10.01pH and 12.45pH.
* Automatic buffer recognition.
* Bi directional RS232 interface. Baud rate selectable from 1200,2400,4800 and 9600.
* Single and continuous print out of measuring parameters.
* Multiple Printout types. Combinations selectable from Sr. No., pH, mV, DO, date, time and temperature.
* Real Time Clock.
* Calibration report as per GLP requirements.
* Electrode Slope and mV offset display.
* LCD display with Backlight.
* Memory storage of 100 measurements.
* Data logging facility up to 500 results. Data logging interval selectable from 5S, 10S, 20S, 30S, 1M, 2M and 5M.
* Temperature calibration with respect to solution of known temperature.

 pH Range   0-14pH
   mV Range   +1999.9mV
   DO Range   0~40.00mg/L(ppm)
   Temperature Range   -10.0 ~ 110.0°C
   pH Accuracy   +0.02pH
   mV Accuracy   +1mV
   DO Accuracy   +1%FS
   Temperature Accuracy   +0.4°C
   ATC pH   0~100°C
   ATC DO   0~45°C
   pH Electrode   pH combination electrode-EpHG03
   Temperature Electrode   Temperature sensor electrode- ETS01
   DO Electrode   DO electrode-EDO01
   Standard Accessories   Magnetic Stirrer MS-01
   Meter Weight   700 g

* Power : 9V/ 500 mA External adaptor
* Operating Temperature : 15~45°C
* Meter Dimensions (mm) : 165 (L) x 190 (D) x 60 (H)
* Meter Weight : 700 g
* Optional Accessories : Magnetic Stirrer MS-01, Battery backup unit BBEC-01 Calibration Standards

Conductivity / Dissolved Oxygen
ms,µs,mg/L,ppt,ppm,%,°C

CCDO

Features
* Conductivity, Resistivity, TDS, Salinity, DO Temperature modes.
* Automatic or Manual temperature Compensation.
* 1 point conductivity calibration for the entire range.
* Dissolved oxygen electrode with the salinity measurement feature to achieve automatic salinity & temperature compensation.
* Automatic air pressure correction with the help of air pressure sensor.
* Polarographic type DO electrode offers short polarization time, quick response and precise measurements.
* Bi directional RS232 interface. Baud rate selectable from 1200,2400,4800 and 9600.
* Single and continuous print out of measuring parameters.
* Multiple Printout types. Combinations selectable from Sr. No., Conductivity, TDS, Salinity, DO, Date, time and temperature.
* Real Time Clock.
* Calibration report as per GLP requirements.
* LCD display with Backlight.
* Memory storage of 100 measurements.
* Data logging facility up to 500 results. Data logging interval selectable from 5S, 10S, 20S, 30S, 1M, 2M and 5M.
* Temperature calibration with respect to solution of known temperature.

 Conductivity Range 0~200mS/cm spread into 5 ranges 0.00~20.00µS/cm, 20.0~200.0 µS/cm, 200~2000 µS/cm 2.00~20.00mS/cm, 20.0~200.0 mS/cm
   Resistivity Range  0~100MΩcm
  TDS Range  0~100ppt(g/L)
   Salinity Range   0~100ppt
   DO Range   0~40.00mg/L(ppm)
   Temperature Range   -10.0 ~ 110.0°C
   Conductivity Accuracy  ±1% FS
   DO Accuracy  ±1% FS
   Temperature Accuracy   ±0.4°C
  ATC Conductivity   0~50°C
   ATC DO   0~45°C
   Conductivity Electrode   ECNG01
   DO Electrode   EDO01
   Temperature Electrode   Temperature sensor electrode- ETS01
   Standard Accessories   Magnetic Stirrer MS-01
   Meter Weight   700 g

* Power : 9V/ 500 mA External adaptor
* Operating Temperature : 15~45°C
* Meter Dimensions (mm) : 165 (L) x 190 (D) x 60 (H)
* Meter Weight : 700 g

* Optional Accessories :
Magnetic Stirrer MS-01,
Battery backup unit BBEC-01
Calibration Standards

ELECTRODES

Contech, offers wide range of electro chemical sensors for the measurement of pH, ORP, Conductivity, DO, different Ion Concentration and Temperature . Choosing a right electrode for the specific requirement is important and the following to be considered while deciding an electrode for the measurement : accuracy of measurement, electrode body, reference construction and junction. Electrodes need to be calibrated with standards for achieving proper results. Electrodes should be stirred end maintained as per instructions to enhance the performance and life.

ELECTROCHEMICAL ELECTRODES

  Electrode

  Model

  Specifications

  Details

  Application

 
pH combination - 
Plastic
  EpHP01    Plastic housing, Ceramic 
Junction, 0~80°C Temp. 
range, BNC : Connector 
Size : 12Ø x 160mm
   Retention of 
accuracy for 
continuous 
measurement
  General lab 
application. Not 
suitable for high 
alkaline chemicals 
(pH>12)
  pH combination 
with built in 
temperature 
sensor
  EpHP02    Plastic housing, Ceramic 
Junction, 0~80°C Temp. 
range, BNC (pH) + Ø   
3.5mm, 2 cores (temp) 
Connector, 
Size : 12 Ø x160mm
  Retention of 
accuracy for 
continuous 
measurement,
collision resistant
  Simultaneous 
measurement of 
pH & temp & 
automatic temp. 
correction
  pH combination -
Glass
  EpHG04   Glass housing 0~90°C  
Temp. range, glass 
ground joint Junction, 
BNC Connector, 
Size : 12 Ø x160 mm
  For high accuracy 
measurement
  Suitable for low ionic 
strength or high 
viscosity solvents, 
ideal for colloidal or 
feculent solvents
  Conductivity   ECNG-01   0.5 µS / cm - 200µS /cm 
range, 1.0+0.2 cm-1 
constant, BNC Connector, 
Size : 12 Ø x155mm,   
5x7mm Pt plate sensitive   
element 
(coated with Pt black)
  Cavity structure 
high precision 
and better 
repeatability
  High precision 
conductivity 
measurement in lab
  Temperature 
Sensor
  ETS-01   -10 ~ 110°C, 5 Ø x   
145mm, Customized 
Connector
  Stainless steel 
material, 
Platinum 
resistor Pt-100
  High precision 
temperature 
measurement
  Dissolved Oxygen
with built in 
temperature
sensor
  EDO-01   Polarographic, 
Size : 15 Ø X 180mm, 
polarization time : 
3~5 mins mini round 
shell connector
  Easily removable 
diaphragm cap. 
Set Consists of 
DO membrane, 
Inner solution, 
cathode polish paper
  Measurement of 
dissolved oxygen 
with built in air 
pressure 
compensation & 
salinity correction
  ORP Combination 
Plastic
  EORP-01   Plastic housing, Ceramic 
Junction, BNC : Connector,
Sensitive element : 1mm Ø
x5mm Pt pin, 
Size : 12 Ø x160 mm
  Plastic housing, 
No KCl refilling 
requirement
  Common solution 
and waste water

REFERENCE ELECTRODES

Contech, offers wide range of electro chemical sensors for the measurement of pH, ORP, Conductivity, DO, different Ion Concentration and Temperature . Choosing a right electrode for the specific requirement is important and the following to be considered while deciding an electrode for the measurement : accuracy of measurement, electrode body, reference construction and junction. Electrodes need to be calibrated with standards for achieving proper results. Electrodes should be stirred end maintained as per instructions to enhance the performance and life.

ELECTROCHEMICAL ELECTRODES

Electrode

  Specifications

  Reference Solution

  Application

 
  ERG 01    Material : Glass, 
Junction : Ceramic, 
Ref. Electrode : Ag/AgCl, 
Size : Ø 12x155mm
   3.5mol/L KCl,   Reference for 
Fluoride measurement
  ERG 02    Material : Glass, 
Junction : Ceramic, 
Ref. Electrode : Ag/AgCl, 
Size : Ø 12x155mm
  1st salt bridge
0.1mol/L KCl
2nd salt bridge 
0.1mol/L CsCl
  Reference for 
Sodium measurement
  ERG 03    Material : Glass, 
Junction : Ceramic, 
Ref. Electrode : Ag/AgCl, 
Size : Ø 12x155mm
  1st salt bridge 3.5mol/L
KCl 2nd salt bridge   
solution (optional)
  Reference for Chloride, 
Bromide, Iodide, Copper, 
Potassium, Nitrate 
Ion measurement
  ERG 04   Material : Glass, 
Junction : Ceramic, 
Ref. Electrode : Ag/AgCl, 
Size : Ø 12x155mm
  1st salt bridge 3.5mol/L
KCl 2nd salt bridge
solution (optional)
  Matching 
multiparameters

ACCESSORIES

Magnetic Stirrer MS-01

* Stirring speed : 0~2300 rpm at no load.
* Base Diameter : 120mm
* Maximum stirring capacity : 1000ml
* Power supply : 6V DC Adaptor
* Dimension (mm) : 120 dia x 50mm height
* Weight : 500 gms.

Electrode Holder EH-01

* Dimensions (mm) :115(L) x 35(W) x 28(H).
* Weight: 22 g.
* Suitable for Electrode : Dia 13mm~16mm.

Stirr Bead SB-01

* Dimensions : 27(L) x 10(W) x 6(H)
* Weight : 5g

MINI Printer CMP-01

* Printing Method : Thermal
* Character Type : Alpha Numeric
* Character per Line : 30 max.
* Communication : RS 232
* Baud Rate : 9600
* Printing Speed : 90mm per sec.
* Paper Width : 57mm
* Power Supply : 8v,3A DC
* Dimension (mm) : 135(L) x 195(D) x 100(H)
* Net Weight : 800g approx.

MINI Printer CMP-02

* Printing Method : Dot Matrix
* Character Type : 8x16dots
* Character per Line : 24
* Communication : RS 232
* Baud Rate : 9600
* Printing Speed : 0.7 line per sec.
* Paper Width : 57mm
* Power Supply : 5v DC, 1.5 A
* Dimension (mm) : 110(W) x 180(H) x 90(D)
* Net Weight : 600g approx.

Power Supply SMPS-04

* Input : 100~300 V AC, 47-63 Hz
* Output : 9VDC, 500mA
* Dimensions with pin (mm) : 50(L) x 70(H) x 70(D)
* Dimensions without pin (mm) : 50(L) x 70(H) x 37(D)
* Weight : 100g

Battery Backup BBEC-01

* Input : 100~300 V AC, 47-63 Hz
* Output : 9VDC, 500mA
* Battery : 6V, 1.2 Ah
* Deminsions : 150(L) x 65 (w) x 40(H)
* Weight : 600g

Calibration Solutions

Solution Corresponding
Electrode
Description Accuracy
CSpH 4.0 pH pH 4.0 + 0.1 pH
CSpH 7.0 pH 7.0 + 0.1 pH
CSpH 9.2 pH 9.2 + 0.1 pH
CSCN 1413 Conductivity 1413 µs/cm +0.5%